Open Ended Hopper
Hire
-
$2,150.00 / Day
Reduce bending and lifting motions while loading items into a hopper. This hopper will allow for convenient and orderly loading at ground level with its open front design. Flat items can be loaded so more can be put into the hopper. Rolling smoothly on 4″ x 2″ phenolic casters, the hopper can easily be moved from one location to another. Once the hopper is full or the user has finished loading, the hopper can be easily dumped with the use of a lift truck.
Related products
-
Coil Ram Attachments
Hire
-
Day Rate
$1,140.00 $1,450.00Price range: $1,140.00 through $1,450.00 / Day
<strong>The Coil Rams are used to easily maneuver many types of coiled material. The Coil Rams are available in the fork mounted models.</strong>Select options -
-
Fork Extension Storage Rack
Hire
-
Day Rate
$570.00 / Day
<strong>The Fork Extension Storage Rack allows operators to install or remove fork extensions without lifting, pushing or getting off the lift truck (fork extensions not included). Easy to use: A) Drive in so tips of forks are over elevated bar. B) Lower forks until fork nests in channel in base of rack. C) Back fork truck out of fork retraining straps.</strong>Select options -
-
Fork Rear Spacers
Hire
-
Day Rate
$220.00 $250.00Price range: $220.00 through $250.00 / Day
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>Select options -
-
Carpet Pole Attachments
Hire
-
Day Rate
$860.00 $2,160.00Price range: $860.00 through $2,160.00 / Day
<strong>Transport rolls of carpet with these sturdy Carpet Poles. Available in either carriage or fork mounted styles. 2-3/4" diameter high strength, rotatable, removeable pole has tapered tip. All units are made of steel construction and painted blue. </strong><strong>Fork Mounted Carpet Poles</strong> <strong>feature 7-1/2"W x 2-1/2"H fork pockets on CRP inverted models, 7-5/8"W x 2-5/8"H fork pockets on CRF models, with 24" centers. Safety chain is included to secure unit to fork truck. </strong><strong>Carriage Mounted Carpet Poles</strong> <strong>are available in class II or III mount and feature a spring loaded locking pin to secure them to the carriage.</strong>Select options -