Provide the extra support needed to lift long or large objects with an extended long fork. The Fork Extension is made from welded steel construction with cast steel tips. Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. Maximum uniform capacity is 4,000 lbs evenly distributed per pair. OSHA regulations require that fork extensions are no more than 50% of the existing fork length (e.g. with 48″ existing forks, the fork extension should not exceed 72″).
<strong>The Hoisting Hook transforms any lift truck into an overhead lifting hoist. Fork openings are located on 13" centers. Secured to the lift truck by means of a 48" long safety restraint and screw clamps. The Hoisting Hook includes a heavy-duty hook with safety clip.</strong>
<strong>Convenient Fork Mounted Work Platforms quickly and safely transport maintenance personnel where they are needed. Attaches to the lift truck by inserting forks into fork pockets and chaining platform to lift truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid-rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to lift truck. The usable fork pockets are 7-3/4"W x 3-7/8"H in rear and 7-3/4"W x 1-7/8"H in front. Capacity is 1,000 lbs. Welded steel construction. Powder coat blue finish. The Full Featured units includes an Emergency Stop Button Kit and Web Lanyard with Safety Harness (must specify size of harness).</strong>
<strong>Dump loaded pallets easily without leaving the seat of your lift truck with the all welded steel constructed Pallet Dumper / Retainer. Unit fits to forks and is secured by a safety chain. Two retainers hold the pallet in place while dumping the contents into the hopper or dumpster. Standard fork pockets are 7 1/2" wide x 2 1/2" high on 25" center, 2000 lbs capacity.</strong>
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>