Fork Mounted Snow Plow Blade
Hire
-
$640.00 – $3,260.00 / Day
Unique design attaches to lift truck forks. Pass through fork tubes keep weight back towards lift truck mast. Locking pins secure snow plow for forks for safety. Manual pivot mechanism for angled plowing on both sides. Floating pads allow for adjustment of plowing height. Adjustable springs allow the 72″ blade to pivot back for safety. Steel construction with painted finish.
Related products
-
High Strength Fork Extensions
Hire
-
Day Rate
$490.00 – $760.00 / Day
<strong>Provide the extra support needed to lift long or large objects with an extended long fork. The Fork Extension is made from a high strength steel construction with a built in lifting handle at the tip for easy installation. Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. 40% lighter than the standard fork extensions with the same 4,000 lbs uniform capacity. OSHA regulations require that fork extensions are no more than 50% of the existing fork length (e.g. with 48" existing forks, the fork extension should not exceed 72").</strong>Select options -
-
Work Platform Forklift Attachment
Hire
-
Day Rate
$60.00 – $2,350.00 / Day
<strong>Convenient Fork Mounted Work Platforms quickly and safely transport maintenance personnel where they are needed. Attaches to the lift truck by inserting forks into fork pockets and chaining platform to lift truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid-rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to lift truck. The usable fork pockets are 7-3/4"W x 3-7/8"H in rear and 7-3/4"W x 1-7/8"H in front. Capacity is 1,000 lbs. Welded steel construction. Powder coat blue finish. The Full Featured units includes an Emergency Stop Button Kit and Web Lanyard with Safety Harness (must specify size of harness).</strong>Select options -
-
Fork Rear Spacers
Hire
-
Day Rate
$220.00 – $250.00 / Day
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>Select options -
-
Fork Extensions
Hire
-
Day Rate
$410.00 – $770.00 / Day
<strong>Provide the extra support needed to lift long or large objects with an extended long fork. The Fork Extension is made from welded steel construction with cast steel tips. Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. Maximum uniform capacity is 4,000 lbs evenly distributed per pair. OSHA regulations require that fork extensions are no more than 50% of the existing fork length (e.g. with 48" existing forks, the fork extension should not exceed 72").</strong>Select options -