Related products

• 

  Wall Mounted Charger Brackets

  Hire

  • Day Rate

    $290.00 / Day

  <strong>Reduces floor damage of chargers and allows for a clean and safe floor area (universal fit). Dimensions: 24.13" deep x 24.13" tall. Supports up to 400 lbs on a wall with sufficient bearing strength.</strong>

  Select options
• 

  Deionizer Water Filtration System

  Hire

  • Day Rate

    $250.00 – $560.00 / Day

  <strong>Certain dissolved impurities in standard tap water will corrode the inside of the battery and decrease your battery life and performance. With a Deionizer Watering Kit, you can easily and inexpensively remove these harmful impurities. This Deionizer Kit purifies water prior to going into the battery. This helps to keep the battery in peak operating condition and can extend battery life. In fact, depending on the supply water quality, one cartridge can clean up to 600 gallons before needing replacement.</strong> <strong>Each battery in your facility cost several thousand Dollars. Each battery has a set amount of potential. Maintaining proper water levels and using purified water can help you to get the most potential out of your batteries. A small initial investment in a Deionizer Kit and a watering tool will help protect your battery investment.</strong>

  Select options
• 

  Battery Cable Magnet

  Hire

  • Day Rate

    $32.00 / Day

  <strong>Hold battery cable in place with 100 lbs magnet. Prevents cable and connector damage by keeping them where you want them. It quickly attaches to any battery cable and holds the cable securely to any metal surface.</strong>

  Select options
• 

  Heat Shrink PVC Battery Cable Protector

  Hire

  • Day Rate

    $20.00 – $40.00 / Day

  <strong>The Heat Shrink PVC Battery Cable protector prevents costly damage to both battery cables & connectors. The protective PVC heat shrink allows forklift operators to separate connectors safely when pulling from the cables. The PVC also prevents damage to battery cables caused by pinching from the hood of the lift truck. To install, simply fit the heat shrink over the connector & cable and apply a heat gun until a tight fit is created. While still warm, place cables back into connector so heat shrink cools to desired shape.</strong>

  Select options