The Low Profile Self-Dumping Hoppers have a full 90° dump angle with a cushioned rubber bumper stop. The low profile design is essential for convenient loading. Dumping with a forklift is quick and simple. A cable is pulled from the seat of the lift truck to dump the hopper. The unit returns to an upright and locked position when lowered to the ground. A locking chain is provided to secure the hopper to the lift truck. 22 “L usable fork pockets measure 7″W x 2″H on 11 5/8″ centers. Unit includes robotic welds for a consistent, durable design. Formed base thickness is 1/4”. Blue powder coat finish.
<strong>The Front Loader is engineered for use with your existing fork truck. "Dust Pan" design is ideal for transporting snow, gravel, sand or refuse. Pull release cable to dump contents of scoop. Attaches quickly and easily to most lift trucks. Beveled front edge for better scooping ability. The fork pockets measure 7 1/2"W x 2 1/2"H on 24" centers. All welded steel construction with durable powder coat finish.</strong>
<strong>Provide the extra support needed to lift long or large objects with an extended long fork. The Fork Extension is made from a high strength steel construction with a built in lifting handle at the tip for easy installation. Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. 40% lighter than the standard fork extensions with the same 4,000 lbs uniform capacity. OSHA regulations require that fork extensions are no more than 50% of the existing fork length (e.g. with 48" existing forks, the fork extension should not exceed 72").</strong>
<strong>Transport large rolls of material with these specialty Triangular or Round Fork Extensions. Fabricated of steel, these specialty fork extensions fit 4" or 5" forks that are up to 2" thick. The length of these specialty fork extensions range from 54" to 63". They feature a quick on/off design with a locking bar to keep the fork extension in place. OSHA regulations require that extensions do not exceed the length of the fork by more than 50%.</strong>