Open Ended Hopper
Hire
-
$2,460.00 / Day
Reduce bending and lifting motions while loading items into a hopper. This hopper will allow for convenient and orderly loading at ground level with its open front design. Flat items can be loaded so more can be put into the hopper. Rolling smoothly on 4″ x 2″ phenolic casters, the hopper can easily be moved from one location to another. Once the hopper is full or the user has finished loading, the hopper can be easily dumped with the use of a lift truck.
Related products
-
Fork Rear Spacers
Hire
-
Day Rate
$220.00 – $250.00 / Day
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>Select options -
-
67° Self-Dumping Steel Hoppers with Bumper Release
Hire
-
Day Rate
$1,390.00 – $3,560.00 / Day
<strong>The Self-Dumping Hoppers automatically dump when the bumper release contacts the side of dumpster. The Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the lift truck to manually dump the hopper. A locking chain is provided to secure the hopper to the lift truck. Usable fork pockets are 7 1/2"W x 2 1/2"H. Constructed with durable, consistent robotic welds. Base fork pockets are 3/16" thick. Powder coat blue finish.</strong>Select options -
-
Rounded or Triangular Fork Extensions
Hire
-
Day Rate
$790.00 – $960.00 / Day
<strong>Transport large rolls of material with these specialty Triangular or Round Fork Extensions. Fabricated of steel, these specialty fork extensions fit 4" or 5" forks that are up to 2" thick. The length of these specialty fork extensions range from 54" to 63". They feature a quick on/off design with a locking bar to keep the fork extension in place. OSHA regulations require that extensions do not exceed the length of the fork by more than 50%.</strong>Select options -
-
Forklift Tie-Down Clamps
Hire
-
Day Rate
$830.00 / Day
<strong>Forklift tie down clamps are a great asset when securing loads for transport. The entire set is comprised of four pieces (2 brackets, 2 clamps). An eye bracket is positioned in front of the load while the screw clamp is placed behind the unit, closest to the forklift driver. These are put in place by sliding over the forks. Simply use the preferred type of tie down such as a nylon strap or chain to secure the load (chain and strap not included).</strong>Select options -