Rounded or Triangular Fork Extensions
Hire
-
$700.00 – $780.00 / Day
Transport large rolls of material with these specialty Triangular or Round Fork Extensions. Fabricated of steel, these specialty fork extensions fit 4″ or 5″ forks that are up to 2″ thick. The length of these specialty fork extensions range from 54″ to 63″. They feature a quick on/off design with a locking bar to keep the fork extension in place. OSHA regulations require that extensions do not exceed the length of the fork by more than 50%.
Related products
-
High Strength Fork Extensions
Hire
-
Day Rate
$440.00 – $660.00 / Day
<strong>Provide the extra support needed to lift long or large objects with an extended long fork. The Fork Extension is made from a high strength steel construction with a built in lifting handle at the tip for easy installation. Steel retaining strap (loop style) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. 40% lighter than the standard fork extensions with the same 4,000 lbs uniform capacity. OSHA regulations require that fork extensions are no more than 50% of the existing fork length (e.g. with 48" existing forks, the fork extension should not exceed 72").</strong>Select options -
-
Fork Rear Spacers
Hire
-
Day Rate
$190.00 – $220.00 / Day
<strong>The Fork Rear Spacers provide a 12" gap between the back of the fork and the pallet. This helps prevent damage to product caused by the back of the fork colliding with the product or longer forks protruding on the other end of the pallet. Practical for pushing pallets two or three deep into a trailer conveniently and easily. To install, insert the loop of the spacer at the tip of the fork and slide along until the loop reaches the heel of the fork to lay down flat. Models available for 4", 5" and 6" wide forks.</strong>Select options -
-
Fork Mounted Pallet Dumper / Retainer
Hire
-
Day Rate
$660.00 / Day
<strong>Dump loaded pallets easily without leaving the seat of your lift truck with the all welded steel constructed Pallet Dumper / Retainer. Unit fits to forks and is secured by a safety chain. Two retainers hold the pallet in place while dumping the contents into the hopper or dumpster. Standard fork pockets are 7 1/2" wide x 2 1/2" high on 25" center, 2000 lbs capacity.</strong>Select options -
-
Fork Mounted Trash Can Dumper
Hire
-
Day Rate
$160.00 – $1,530.00 / Day
<strong>The Fork Mounted Trash Can Dumper attachment saves time and reduces work-related injuries caused by lifting and dumping heavy waste containers. This innovative product will allow a forklift driver to lift and dump refuse containers, weighing up to 1,000 lbs, without ever leaving the seat of the lift truck. Only for use with 64 gallon trash can, model TH-64. Fork pockets are 2 ¼" high by 7 ¼" wide usable. Steel construction.</strong>Select options -