Reduces floor damage of chargers and allows for a clean and safe floor area (universal fit). Dimensions: 24.13" deep x 24.13" tall. Supports up to 400 lbs on a wall with sufficient bearing strength.
The 175 Amp and 350 Amp Battery Connector Kits come complete with high strength polycarbonate housing, (2) silver plated connector lugs and convenient connector handle. The plastic housing is also available separately to replace any currently damaged connectors. The connector handle provides a gripping point to disconnect the cables from bat...
The Low Propane Fuel Gauge is a new patented technology that senses when the cylinder has approximately one half gallon of LPG left in the cylinder. This gives the forklift operator 20 - 30 minutes advanced notice to complete the job and exchange cylinders in a safe area. Running Out of Propane is Never Productive or Safe! Get a 20 Minute Wa...
Operators are required to wear proper hand protection when exchanging propane cylinders. The PVC Propane Gloves are used to safely exchange propane cylinders and helps prevent any injuries to the operator's hands. Extremely cold propane can cause frost burn to exposed skin and can ultimately cause nerve damage if no protection is worn. The PVC Gl...
Operators are required to wear proper hand protection when exchanging propane cylinders. The PVC Retracto-Glove is used to safely exchange propane cylinders and helps prevent any injuries to the operator's hand. Extremely cold propane can cause frost burn to exposed skin and can ultimately cause nerve damage if no protection is worn. Retr...
The PPE for LPG contains all of the required PPE to change propane tanks. Each kit comes complete with a pair of neoprene safety gloves, safety glasses, a leak detector and a full set of easy-to-follow instructions. The wall board can be easily mounted in the propane changing area.
Take the LPG coupler on & off easier and safer. The LPG Safety Grip is a soft rubber boot that easily fits over the brass coupler preventing serious thermal injury burns caused by escaping liquid propane (brass coupler not included). Note: The Safety Grip does not eliminate the required PPE for changing LPG cylinders.
Damaged propane couplers may cause LPG leaks that result in possible injury to operators. Couplers that are damaged and do not fit properly should be replaced immediately. The brass & steel construction coupler connects directly to the forklift propane hose and installs in a matter of minutes. Standard coupler 1 1/4" x 1/4" FNPT, UL Listed.
Install it anywhere CO is a hazard. Installs on walls, trailers, forklifts, racking etc.
Here is a low cost method to determine if your lift trucks are producing dangerous levels of carbon monoxide. Just place one of these cards in the warehouse. If the "detector eye" changes color, you need to address your lift truck emissions.
Test your propane junctions and hoses safely with this specially made compound. Just a few drops and this compound spreads quickly, providing a long lasting foam exposing the point of leakage. A must have for propane powered equipment operators.
Finally an easy answer to lifting, storing and transporting problems associated with LP tanks. This all-in-one cart will allow the user to transport LP tanks to the location they are needed. The built-in crane can be used to safely load full tanks into fork trucks. The crane pivots 360° for maximum versatility. The crane boom is raised and lowere...
The Propane Cylinder Caddy moves cylinders safely and is designed to transport up to (6) full LP tanks. Safety chains hold the tanks in place. Made of all steel construction.
Store cylinders of all sizes in these heavy duty Cylinder Storage Cabinets. Made of all steel construction, this rust resistant unit has steel angle frames, 8 gauge galvanized welded wire and a 12 gauge galvanized steel roof. The galvanized rust resistant finish stands up to harsh indoor and outdoor environments. Units can hold 4, 8, or 16 units...
The EZ-Fit Comfort Harness is a perfect economical solution to achieving supreme operator comfort when working with heights. The EZ-Fit Harness is designed with integrated back and shoulders pads allowing for all day comfort to the wearer. The bayonet style buckles on the chest and legs allows for quick and easy donning of the harness and eli...
The EZ-Fit 6' Retractable Lanyard can be used in conjunction with the EZ-Fit Harness to arrest a free fall within inches rather than a few feet as with a standard shock-absorbing lanyard. The EZ-Fit Retractable Lanyard comes with a steel twist-lock carabiner and a locking snap hook and is OSHA/ANSI compliant.
The Rite-On Harness is designed for simplicity and comfort. The bayonet connectors allow users to connect their chest and leg straps in a single action.
Reduce back strain and improve forklift operator ergonomics with the Ergo Back-up Handle. Forklift operators who are required to travel frequently in reverse often grab the overhead guard. This is a dangerous practice and has resulted in serious injuries. The Back-up Handle is placed inside the overhead guard and allows a forklift operator's hand t...
Operating a forklift can feel uncomfortable when the weather gets hot. The Forklift Operator Fan is designed specifically for forklifts and conveniently mounts anywhere on the overhead guard using two powerful magnets. The fan has a low-speed, high-speed and off switch to control the ventilation required and is equipped with a 7’ power c...
64 - 84 of ( 297 ) records
